BEEST Multipurpose Primer

Most coating failures start before the topcoat is even applied. Surfaces like EPDM rubber, TPO membranes, concrete, and weathered wood cannot hold sealants properly without the right primer underneath. When coatings are applied directly onto these surfaces, peeling, bubbling, and edge lift become far more likely over time. BEEST Multipurpose Primer creates the bonding layer that helps coatings stay locked in place through rain, UV exposure, and seasonal temperature changes.

• EPDM and TPO surfaces require proper priming before liquid rubber coatings are applied
• Improves topcoat bonding strength on difficult and low-grip surfaces
• Helps reduce peeling, flaking, bubbling, and edge separation over time
• Essential prep step before BEEST RV Roof Coating and other compatible sealants
  

EPDM and TPO are some of the most difficult roofing materials for coatings to adhere to. Many standard primers struggle to bond reliably, especially on older or weathered surfaces. Our elastomeric roof primer is specifically formulated for slick, low-adhesion surfaces and also works on fiberglass, metal, concrete, PVC, and wood. One primer handles mixed-surface projects without switching between multiple products.

• Works across EPDM, TPO, fiberglass, aluminum, concrete, PVC, and wood
• Ideal for RV roofs, decks, basement surfaces, planters, and pond areas
• Eliminates the need for multiple surface-specific primers
• Helps restore coating grip on aged and weather-exposed surfaces
  

Complicated prep work slows projects down before coating even begins. BEEST roof sealant primer applies easily with a brush, roller, or sprayer for fast, even coverage across large surfaces. The quick-drying water-based formula helps reduce downtime so you can move to your topcoat sooner without dragging the project out for days.

• Applies with standard brushes, rollers, and paint sprayers
• 1 gallon covers up to 250 sq ft for most residential applications
• Use 1 to 2 coats depending on surface condition and porosity
• Topcoat can be applied within 24 hours after primer dries
  

Strong solvent fumes can make coating projects uncomfortable, especially in enclosed spaces like basements, garages & RV interiors. BEEST roof repair primer uses a water-based, ultra-low-odor formula that is easier to work around during application. Cleanup takes only warm water, and once fully cured, the surface is safe for normal daily environments.

• Ultra-low VOC formula with no harsh chemical smell
• Warm water cleanup with no solvent-based cleaners required
• Non-toxic once cured and safe around people and pets
• Suitable for both indoor and outdoor coating projects